Salient Features

1.Connection between the crankshaft and bed as well as the rod all adopts the world-class SKF bearing for assortment, which is of small friction, quick and flexible operation and saving power.

2.Being cast by adding the nodular cast iron with alloy contained in the bed, therefore it possesses high tensile strength and favorable wear-resistance.

3.The main slide of five-station desk uses the trapezoidal design, which is limited by the fixed and adjustable plates on both sides and simply and closely structured, by assorting with the materials of highly wear-resistant alloy steel, first-class heat treatment and the overall lubricant road, so as to maximize the high-speed operation of bearing, and it is suitable for processing ordinary nut and roller products, bringing magnificent returns for the clients.

4.Cropping system uses the guide board to drive the cutting holder, and the guide board reciprocates and the cut off force transmits directly, which is kind of high-powered, stable and good dynamic balance.

5.Equipped with the pneumatic braking, it is flexible to control and convenient to debug.

6.Configured by the fault detection device and safety protection device, if the equipment is out of order, it will be shutdown automatically, providing a maximum protection to the equipment and tools mode.

7.Installed with the backstop equipment in the feeding box, improving the feeding accuracy.

This Series Nut Former are used to produce DIN 934, 985, 1587 and so on.

Main Technical Parameters

Data		11B5S	14B5S	17B5S	19B5S	24B5S	27B5S	33B5S
Dies		5	5	5	5	5	5	5
Forging Power	Ton	60	95	120	150	250	300	400
Cut-off Dir	mm	11	16	18	20	24	27	30
Cut-off Length	mm	7	11	13	15	20	21	25
Product Size	DIN	M4-M6	M6-M8	M8-M10	M10-M12	M12-M16	M12-M18	M16-M22
Output Rate	Pcs/min	300	200	180	170	120	120	80
Stroke Length	mm	50	70	80	100	110	110	200
Kick out Length	mm	13	18	20	20	35	35	35
Dies Pitch	mm	50	60	70	80	100	100	140
Main Motor	Hp	15	20	30	50	75	75	100
Air Pressure	Kg	3.5	3.5	3.5	3.5	3.5	3.5	3.5
Lubricant Pump	Hp	1	1	2	2	2	2	3
Lubricant Oil	L	3	4	5	6	8	8	10
Weight	Ton	4	8.5	10	17	23	25	38
Machine Size	M	2.15*1.55 *1.06	2.8*2.05 *1.3	3.67*2.0 *1.4	4*2.45 *1.45	5*3 *1.7	5*3 *1.7	5.5*3.0 *1.7

Production Items:
Extra thick nut, Flanged nut, Motorcycle link pin, Oil Plug screw, Hex socket lockup nut, Squire nut, Weld nut, Cap nut, Blind Nut, Chain roller, Expansion anchor, Bicycle and Motorcycle shaped Spare Parts, etc.Main Technical Parameters

Data		11B6S	14B6S	17B6S	19B6S	24B6S	27B6S	33B6S
Dies		6	6	6	6	6	6	6
Forging Dia.	mm	11	14	17	19	24	29	30
Cut-off Dia.	mm	11	14	17	19	24	29	30
Forging Length	mm	14/20/35	18/30/50/70	20/50/70	25/50/70	35/70	40/70	40/80
Product Size	DIN	M4-M6	M6-M8	M8-M10	M10-M12	M12-M16	M12-M18	M16-M22
Output Rate	Pcs/min	175/350	75/160	65/130	95	75	75	70
Stroke Length	mm	60/65/125	70/100/160/220	80/160/220	95/160/220	160/210	160/210	160/280
Dies Pitch	mm	50	60	70	80	100	100	140
Main Motor	Hp	15	20	30	50	75	100	150
Air Pressure	Kg	3.5	3.5	3.5	3.5	3.5	3.5	3.5
Lubricant Pump	Hp	1	1	2	2	2	2	3
Lubricant Oil	L	3	4	5	6	8	8	10
Weight	Ton	4.3	8.5	10	17	28	30	45
Machine Size	M	2.3*1.55*1.35	3.0*1.95 *1.75	3.5*2.2 *1.85	3.6*2.2 *1.85	5.5*2.5 *2.7	5.5*2.5 *2.7	6.5*3.0 *2.8